Contact Us

TEL: +86-574-63297063
E-mail: candy@zhongdingpcsheet.com

Address: NO.42, Binhai 5th road, Hangzhou Bay New Zone, Ningbo, China.

Polycarbonate Greenhouse Panels

Product Specifications Size Chart Product Features 1, light transmission --- depending on the color of the different, transparent rate of up to 12% -82% 2, noise --- hollow structural board (polycarbonate) has a good noise characteristics, can effectively reduce noise 3, moisture --- special...

  • Features & Specification

    Product Specifications Size Chart

    Product Name

    PC sunshine board

    size

    2.1m * 6m /1.22m*2.44m (special size can be customized)

    Structure

    Double, three, four, six, honeycomb, U-shaped buckle

    Thickness

    4mm-16mm

    Color

    transparent, blue, green, brown (special size and custom)

    Scope

    greenhouses, all kinds of architectural lighting ceiling, interior decoration

    p201707071114120918394.jpg

    Product Features

    1, light transmission --- depending on the color of the different, transparent rate of up to 12% -82%

    2, noise --- hollow structural board (polycarbonate) has a good noise characteristics, can effectively reduce noise

    3, moisture --- special hollow structure, can effectively reduce the energy consumption of building thermostat

    4, weatherability - with excellent weatherability, at minus 40 degrees to 120 degrees high temperature to maintain the stability of the physical performance indicators

    5, flame retardant --- According to the national standard GB8624-1997 flame retardant B1 level

    6, easy to install --- easy to install, cold bend

    7, impact resistance - good toughness, not easy to be destroyed in the transport installation and use; impact strength is plexiglass 10-27 times

    8, Anti-UV anti-aging: 50 microns UV UV co-extruded product layer, outdoor weathering is good, long-term use still maintain good optical properties and mechanical properties

     p201707071250019056353.jpg

    Installation and maintenance precautions:

    1, using the appropriate high-speed round according to cutting, the cutting process requires a fixed device limit, after cutting the air purge hole sawdust.

    2, the sheet can be cold bending, the direction must be parallel with the ribs, leaving 3% of the expansion space, both sides of not less than 20 mm inlay, should be sealed with rubber strips.

    3, when installing the printed side of the pattern must be the sun, the other installation process, the first edge of the protective film opened about 5 cm, until the installation is complete, and then tear off the protective film, tear protection is prohibited to use sharp tools.

    4, When drilling installation is needed, the plate will displace due to expansion. The diameter of the drilling hole should be more than 50% of the diameter of the screw. When drilling on the four sides, it should be more than 20 mm from the edge of the plate.

    5, During the installation process, the construction workers can not directly stand on the board construction, need to pad the board surface and the wooden board fixed to the frame, can walk on the board.

    6, the board can not be exposed to alkaline substances, and aggressive organic solvents, such as acid glass, alkali, alkali salt, amine, ketone, aldehyde, ester, ether, halogen, halogenated hydrocarbons, aromatic hydrocarbons, methanol, Methanol, asphalt and putty (putty) and so on.


Hot Tags: polycarbonate greenhouse panels, China, manufacturers, suppliers, factory, wholesale, customized, cheap, buy, price, for sale
Related Products
Inquiry