Contact Us

TEL: +86-574-63297063

Address: NO.42, Binhai 5th road, Hangzhou Bay New Zone, Ningbo, China.

Home > News > Content
Polycarbonate Solid Sheet Main Use
Jun 23, 2017

Polycarbonate Solid Sheet Main use 

Main use editor

Be applicable

In the garden, the venue of the exotic decoration and resting place of the Pavilion Pavilion;

Suitable for commercial buildings inside and outside the decoration, the walls of modern urban buildings;

Applicable to aviation transparent containers, motorcycle front windshield, aircraft, trains, ships, cars, motorboats, submarines and glass police shield;

Applicable to telephone booths, advertising signs, light boxes advertising, display the layout of the exhibition;

Applicable to instruments, meters, high and low voltage switchgear panels and military industries;

Applicable to wall, top, screen and other high-grade interior decoration materials;

Suitable for highways and urban viaduct noise barriers;

Applicable to agricultural greenhouses and greenhouses;

Suitable for modern ecological restaurant ceiling;

Applicable to all units or areas within the bike shed, balcony sun awning and roof rest booth;

Applicable to office buildings, department stores, hotels, villas, schools, hospitals, sports venues, entertainment centers and public facilities such as lighting roof.

PC board processing methods are mainly three kinds of sagging method, flat blowing method and the cited. Sagging method from the bottom of the nose leads to the process of dropping method, the characteristics of suitable viscosity of the raw materials and high transparency requirements of the film, such as polyvinylidene chloride, polypropylene, polyamide. The method of flat-blowing method is mainly used for the production of polystyrene, polyethylene and polyvinyl chloride film. The flat-blowing method is also used to produce heat shrinkable film. On the lead film thin tube in the pc board processing machine head above the process known as cited method for the production of PVC and polyethylene film, bubble tube around the need to use the board or film to prevent the external wind to make the tube swing.

PC board in the processing of plastic molding process mainly pay attention to the film thickness uniformity (extrusion of the surrounding squeeze is uniform), inflation (adjust the cooling air ring position and air volume), traction speed, open air inflation tube film There are cooling, gap width, the surrounding thickness, have decided the success or failure of the PC board, PC Nai Liban the same token.

PC board and PC Nai Liban has the characteristics of inventory.

Light hard: light weight, only half of the glass, acrylic plate 1/3, good safety, adaptability, easy drilling, handling, truncated installation, the construction of simple processing, easy to break.

Flammability: PC board Stamina itself is not self-igniting and has self-extinguishing.

Flexibility: according to the design of the site at the site using cold-formed way, installed into arched, semi-circular roof and window.

Transparency: fiber is 12% -20%. PC board at -100 ℃ does not occur when the crisp, not softened at 135 ℃, in harsh environments, its mechanical, mechanical and other functions were no significant changes. Excellent lighting, light transmission rate of up to 75 ~ 90%, and its transparency can be comparable with the glass.